Here you will able to know about best tig welder under 2000 because we will discuss properly about best tig welder under 2000.
Different TIG welders in comparison
Find your best TIG welder for different jobs – our test or guide 2022
Every professional welder knows that a high-quality TIG welder is indispensable for a clean weld and strong seams. Therefore, even amateur welders should thoroughly inform themselves about the properties and product features before buying a TIG welder.
In doing so, you should know in advance which materials you want to weld and which functions are important to you in a TIG welder.
In our product comparison, we present 7 welding machines and go into more detail about their product features and the advantages and disadvantages of the device.
In addition, our guidebook provides you with a wealth of information on the various functions and setting options of TIG welders. We explain which types of welding equipment are available and which type of welding you will achieve the best results for your project.
In addition, we tell you whether Stiftung Warentest and Öko Test have conducted a TIG welder test.
Berlan BWIG180 TIG welder for continuously adjustable welding current.
The Berlan BWIG180 TIG welder is versatile and can weld conventional electrodes as well as TIG welding, which is possible due to the optionally available shielding gas.
The compact device is easy and handy to operate and is suitable for both professionals and amateur welders, which is due in no small part to its simple operation. In addition to the attractive appearance, with the Berlan BWIG180 TIG welder, you get a welder with good ignition properties due to the HF ignition.
You can adjust the welding current continuously between 20 and 180 amps. In addition, the compact design with carrying handle allows that
you can use the TIG welder mobile without any problems. A 16-amp mains fuse provides sufficient protection against overheating. A hose package, welding shield and slag brush are also supplied with the TIG welder.
Technical data at a glance:
- Mains voltage: 230 volts/50 hertz
- Rated power: 3.7 kilovolt amperes
- 4 kilovolt amps at 60 percent ED
- Power factor: 0.93
- Mains fuse: 16 amps
- Protection class: IP21
- Gas type: Argon, CO2
- Open circuit voltage: 56 volts
- Welding current: 20 – 180 amps, DC
- Dimensions: approx. 371 x 155 x 295 millimetres
- Weight: approx. 12.3 kilograms
What is HF ignition?
This is usually used for TIG welding. HF is the abbreviation for high-frequency charge, which is ignited and bridges the non-conductive air. It thus establishes contact between the tungsten electrode and the work piece. High-frequency arc ignition prevents contamination of the molten pool and ensures longevity, as the tungsten electrode does not come into contact with the work piece.
Does the machine have a gas follow-up function?
When you stop welding, the Berlan BWIG180 TIG welder has a gas run-on function of approximately 2 seconds.
Can I weld aluminum with the Berlan BWIG180 TIG welder?
No, unfortunately not, because you cannot use it for AC welding.
Is it possible to weld in 4-stroke with the unit?
You can only weld in two-stroke, but this works very well.
Can I connect another hose package to the device?
Yes, as long as it is compatible with the standard connections.
What are the two knobs for?
The knob on the left side is for current control and the one on the right side is for re-ignition during TIG welding.
IPOTOOLS IGBT MIG250 TIG welder – better welds through inverter technology.
This device of the IPOTOOLS brand promises better welded joints and good regulation during welding work due to inverter technology.
You can use the welder on an input voltage of 230 volts and easily transport it due to its low weight of 15.6 kilograms. Here also shows the advantage of the carrying handle on the top. Also contributing to your mobility is the 3-meter hose package and the 2.5-meter electrode holder and ground clamp.
The MIG welder not only allows you to perform low-noise MIG welding. Rather, you can also use it for flux-cored welding, with or without gas. In addition, MMA-E manual welding is possible, which makes the IPOTOOLS MIG-250 TIG welder suitable for both beginners and professional welders.
You can weld both thin and strong materials such as steel, aluminum and stainless steel in all positions. The inverter technology ensures clean seams as well as spatter-free and continuously adjustable welding.
Technical data at a glance:
- DC MIG/MAG and E-Hand possible
- Input voltage: 230 volts
- Frequency: 50/60 Hertz
- Degree of protection: IP21S
- Overvoltage protection – Cooling – Fan – Solenoid valve
- Welding current MIG: 30-250 amps/MMA: 20-200 amps
- Electrode diameter MMA: 1-4 millimeters
The manufacturer has paid particular attention to the efficient design of this welder, which should ensure a longer service life. Using the control panel on the front panel, you can control the
Set parameters such as the wire feed speed or the power.
What is flux-cored welding? With this method, you can make fine and consistent welds without further shielding gas. To do this, you only need to change the polarity of the gun and the ground cable to the negative pole.
Does the unit have a gas after flow time?
Yes the IPOTOOLS IGBT MIG250WIG welder has a gas pre-flow time and a post-flow time. However, this is not adjustable.
How many amps are one stroke on the MMA scale?
For MMA welding, the scale starts at about 30 amps. Mig/Mag welding at about 14 volts.
What is the diameter of the welding wire roll?
MIG-250 inverter is suitable for a maximum of 5 kilograms of welding wire roll with a diameter of 20 centimeters.
Does the device have overheating protection?
Yes, it has an overheating protection.
STAHLWERK AC/DC TIG 200 ST IGBT TIG welder – welding with direct and alternating current:
With the STAHLWERK AC/DC TIG 200 ST IGBT TIG welder, you can weld almost all metals such as aluminum in direct current and alternating current. Thanks to the tungsten inert gas welding process, you control the arc, have a narrow welding zone and work without spatter.
As a result, you will succeed in clean welds, benefiting from the ease of use, the pass behavior and the high blocking voltage. The manufacturer has installed high-quality IGBT transistors in the TIG welder.
The welder has an HF ignition , which makes the welding results reproducible, not least due to consistent welding parameters at the start.
The gas advance and over travel protect the tungsten electrode from wear and at the same time protect the weld from oxidation.
You can regulate the arc width via the ARC Force spray arc. You can select two-cycle or four-cycle welding via a switch. STAHLWERK AC/DC TIG 200 ST IGBT TIG welder can equip with anti-stick function, which is to prevent the stick electrode from sticking.
TIG welder technical data:
- Output current: 10-200 amps
- Duty cycle: 60 percent at 200 amps
- Protection class: IP21S
- Mains voltage: 230 Volt , Mains frequency: 50/60 Hertz
- Mains fuse: 1 x 16 Amp
- Recommended input current: 28 amps
- Maximum connected load: 7.5 kilovolt amps
- Recommended generator output: 6.1 kilovolt amps
- Weight: 11.2 kilograms
Two high-speed fans provide ample cooling and overheating protection. The fan allows you to use the welder continuously and exploit the maximum power.
However, if the unit overloads in the process, the overheating protection kicks in and a pilot lamp lights up. You should always keep an eye on the indicator light.
Can I get this unit with an 8-meter hose package?
Currently, you can only get the total package with 4.5-meter hose package. A separate 8-meter hose package will be available soon. Unfortunately, an exchange with an additional charge is not possible.
What is the maximum electrode diameter I can weld?
In TIG mode, you cannot and should not use more than a 3.2-millimeter electrode at true 200 amps. In ARC / MMA mode, you can process 4-5 millimeter electrodes with 200 amps.
Can I optionally connect a foot pedal to regulate the welding current?
Unfortunately, the STAHLWERK AC/DC TIG 200 ST IGBT TIG welder is not compatible with a foot pedal. It should be possible in the future with newer models.
Does this STAHLWERK AC/DC TIG 200 ST IGBT TIG welder have DC and AC and can I weld stainless steel and aluminum with it?
This is an AC/DC unit, with which you can process steel, stainless steel, aluminum and also copper.
TIG welders for professionals and advanced welders
TIG welders deliver the cleanest work when welding. However, the technique involved in welding with a TIG welder is not easy to learn, which is why TIG welders can mainly use to professionals. But hobbyists also like to try their hand at professional TIG welders to achieve clean results.
Here, the quality of the weld is highly dependent on how good their skill is with the equipment. To ensure that you can satisfy with your work in the end, we have taken a closer look at the features of TIG welders in our guide and go into more detail about the different welding processes.
What welding processes are there?
When welding, you can basically distinguish between two techniques, because welding is possible with both pressure and heat. Therefore, a differentiation can make between the following welding techniques:
- pressure welding
- fusion joint welding
The latter involves working with temperatures of several 1,000 degrees Celsius, which can only achieve by the arc of an electric welder. These welding machines working with heat are often smaller and cheaper.
In addition, they are easier to transport because they are so easy to handle. Fusion joint welding is therefore the most commonly used method and is also very popular with professionals
What are the types of welding equipment?
In the trade you will find many types of welding equipment, all of which have different functions and can use in different areas. To help you choose the right one, we’ll go into more detail about the most common uses welding equipment.
The most commonly used welding equipment is the electrode welder. Mostly, these devices can use especially in the construction industry and by craftsmen.
Electrode welders are also popular in mechanical engineering. This device creates temperatures of up to 5,000 degrees Celsius. In doing so, you can use it for numerous welding jobs. In electrode welding, you do not need a gas supply.
The arc builds up after a voltage can apply between the work piece and the rod electrode. This electrode can build up during the welding work and can constantly track.
The sheath around the electrode also burns off and can use as material. The resulting gas cloud insulates the weld pool from the ambient air.
The combustion produces slag, which contributes to cooling:
- Work possible in awkward positions
- Favorable welding process
- Easy to work
- Also suitable in windy conditions
- Can also use for mild steel and stainless steel
- Ignition of the electrode on the workpiece is not very easy
- Welding process is relatively slow
- Electrodes must change regularly
- Due to the change must restart
MIG inert gas welding equipment:
With this method you can weld mild steel as well as stainless steel and aluminum. The so-called metal inert gas, or MIG for short, is used. This shielding gas prevents a reaction with the work piece.
This means that the electrode and the molten weld can isolate from the surrounding air. You can prevent oxidation with this shielding gas welder. Several substances can use as shielding gas, but mostly the equipment can use with CO2 or a mixture of argon and CO2. Therefore, the MIG shielding gas welders are also known as CO2 welders.
- Can be used without settling
- Better weld seam quality
- Consistent seam formation due to neutral shielding gas
- Relatively simple welding technique
- Processing of sensitive materials such as sheet metal possible
- Supply of shielding gas is required
- Not suitable in windy places
MAG inert gas welding equipment
MAG shielding gas welders are mainly used for unalloyed or only low-alloyed metals. For example, you can use them to weld boiler steel, pipe steel or even construction steel.
MAG inert gas welders use metal active gas, which is a mixture of CO2, oxygen and argon. With these welders, you create a chemical reaction with the work piece. This allows you to produce high quality welds.
- Usually a combination of MIG/MAG welding unit
- No slag is formed
- Numerous welding positions and techniques are feasible
- Not suitable for windy places
- Very expensive
- You have to supply shielding gas externally
TIG shielding gas welders
In our product comparison, we have presented some TIG welders. As mentioned earlier, the abbreviation TIG stands for tungsten inert gas.
TIG welders are so popular because with them, due to the high melting point, you spare the electrode and do not consume it. With these welders, the welding wire is supplied externally. You can weld thin sheets with a TIG welder, both steel and stainless steel, copper and brass.
- Very good quality of welds
- The feeding of the welding wire can be manipulated
- Both AC welding and DC welding are possible
- High frequency ignition is safer
- Not suitable for windy places
- Technique is difficult to learn
- You have to use both hands
- This means you have to use a helmet instead of a welding shield
Flux-cored welding equipment
These welders use a self-protecting flux cored wire instead of shielding gas. The contract consists of gas formers and alloy additives. It also has additives that stabilize the arc.
Thus, when the cored wire burns, a shielding gas is automatically formed. This also protects the weld from oxidation. There are also MIG/MAG welders that can be used with such a flux cored wire, but with a smaller width than with shielding gas.
- No shielding gas necessary
- Use of MIG/MAG with appropriate equipment
- Current can be adjusted
- Welds not always clean
- Limited power
- Limited formation of shielding gas
- No welding of thin sheets possible
Oxy fuel welding equipment
You can use oxyacetylene welders especially for delicate metals or sheets up to eight millimeters because they do not generate excessive heat. You can also weld aluminum, copper and brass if you also use flux.
For oxyacetylene welders, you need two gas cylinders with fuel gas such as acetylene and oxygen, and no electricity is required. During the welding process, the open flame of the torch encloses the molten metal, which means that there is no longer a supply of oxygen.
- Adjustable speed of the gas outflow
- No shielding gas and no current
- Work piece is only moderately heated
- Not suitable for sheets larger than 8 millimeters
- Slow welding
- Fluxes are not environmentally friendly
Then a TIG welder is suitable
We have already highlighted the advantages of the TIG welder. To help you make a purchase decision, let’s take another closer look at the features of TIG welders that are particularly worth highlighting.
As already mentioned, these welders produce very clean seams, which are also very strong and durable. Before buying a welder, you should think about what kind of material you want to weld.
TIG welders are especially good for working on thin sheets of all types. If you plan to weld copper sheets, steel pipes, steel beams or even aluminum angles, you will be well advised to use a TIG welder. Another good feature of TIG welders is that they produce hardly any fumes and welding spatter, which in turn protects your health
How do TIG welders work?
The various welding processes differ particularly with regard to the electrode. This consists of tungsten in the TIG welders and has the advantage that it does not melt off. With this type of welding, you have to add the filler metal yourself.
You can decide if you need this additive, but you should be aware that you need both hands to do this, so you can only work with a welding helmet instead of a welding shield.
Your TIG welder will usually come with a hose package that includes a control line, shielding gas supply line, and welding power line.
Your unit may also need a water cooling system. The shielding gas ensures that no oxidation occurs, which in turn could damage your weld. In TIG welding, you work with inert gases such as argon, helium, or a mixture of the two. These gases affect the welding process.
Most TIG welders let you choose between direct current and alternating current, and you connect the unit to the power source via the hose assembly.
Depending on the material you are working on, you can choose the appropriate type of current for better results.
When welding with direct current, you also have the choice between positive and negative polarized electrode. This type of welding is mostly used for materials such as stainless steel, mild steel, alloy steels and copper or brass.
AC welding, on the other hand, is suitable for light metals such as aluminum or magnesium, as these have a hard oxide layer.
Applications of TIG welding equipment
The devices are particularly known for producing very clean and fine welds. Therefore, they are also suitable for filigree work, such as that required on thin sheets.
With a TIG welder, you weld with pinpoint accuracy and do not run the risk of deforming the work piece. TIG welding produces less slag and welding spatter, which protects your health, as does the reduced development of fumes.
Especially in the construction industry, it is hard to imagine today without TIG welders, as they allow very high quality work on steel, pipes or railings. In the aerospace industry, too, the good quality of weld seams is enormously important, which is why many companies rely on this type of welding. This is another reason why professionals or advanced welders like to use the welding equipment. However, the high quality comes at the expense of speed.
What additional features do the TIG welders have?
In our product comparison, we have already presented some welders that, depending on the design, can equip with special additional functions. These special functions facilitate the work and will intend to ensure better results.
For example, some welders can equip with a working memory that stores the settings. Meanwhile, manufacturers have incorporated some product features that leave no technical wishes unfulfilled. One of these additional features is the pulse function.
This function is particularly popular with professional welders. The name can derive from the fact that the pulse function allows you to work with pulsating current during welding.
The current supply will divide into basic current and pulse current, and you have the option of setting the frequencies and pulse heights, and widths of the two currents. The setting is independent of each other. The pulse function
allows you to better meter the heat input, which is particularly suitable if your material has gaps.
The pulsing function allows you to bridge these gaps without creating a hole. In addition, the pulsing current allows you to prevent defects from occurring at the beginning or end of a weld.
When welding with pulse function, you melt the surface, preventing it from melting through from the sheets. Especially for laymen in this field, this can very beneficial.
This is what you should consider when buying a TIG welder:
Before you buy a TIG welder, you should think carefully about what requirements you have for the device. Here you should know exactly what kind of materials you want to use and how, when, and where your unit will be used.
The following criteria should be included in your purchase decision:
Power: In most cases, the power can specify on the devices we present. You should make sure that the amperage is adapted to the electrodes used and that the device has the right power for your purposes. Here it is always advantageous to have several power levels to choose from.
Duty cycle: The duty cycle of some devices is limited because the electrodes and power supply heat up. So that your welder does not suffer damage, there is a so-called overheating protection and an indicator light glows when the device becomes too hot.
Before you buy a TIG welder, you should find out about the maximum duty cycle. Also, the cooling period is of great importance if they do not want to wait so long to continue the welding process.
Cooling: some TIG welders have built-in cooling, which ensures that longer duty cycles are possible for you. Often, fan-like blowers in the housing provide adequate cooling. Some units use shielding gas for cooling.
Operating voltage: Before buying a welder, you should also look at the operating voltage. For 230 volts AC, you need to fuse the power connection.
Accessories: some manufacturers offer their customers accessories in addition to the TIG welder, such as a welding shield, a welding helmet or a slag hammer. Optionally, you can often purchase additional hose packages or foot pedals.
Price: the price of a TIG welder can vary greatly depending on the function, equipment and performance. Before buying, you should make sure that the unit is of high quality workmanship and performs well. Welding equipment can produce shoddy and inferior results if you cut corners.
Welding is a dangerous job if you don’t take the necessary safety precautions. You are exposed to the following hazards when welding:
- Very high heat
- Flying sparks
- High UV radiation
- Extreme brightness
It is important that you adequately protect yourself during the welding process and acquire professional equipment. This includes leather gloves, which provide sufficient protection from flying sparks and the intense heat. To protect the body, you should also tie a leather apron. Special welding helmets provide sufficient protection against sparks, heat and especially the extreme
Brightness: The helmets are equipped with a certain window of vision that protects your eyes from injury.
In addition: you should put on hearing protection when working. To escape the effects of fumes, your work place should be adequately ventilated.
When you perform with TIG welding, you should prefer the welding helmet with the darkened protective glass visor over the welding shield. With most TIG welders, you need both hands to operate them anyway, which make holding a shield impossible.
Make sure your work area is tidy. Tripping hazards can result in serious accidents, and flying sparks can easily start fires.
Prepare the work piece for welding:
You should not underestimate the preparatory work on the work piece when welding. You can have a TIG welder, no matter how professional it is, but your welds will still be messy if oxides, tickers or flammables are involved. Therefore, it is important that you prepare the workpiece. Here, you should first remove all oils and greases. After that, you also need to remove rust and paint residues.
To prevent residues from remaining in the process, you should grind the work piece. This will ensure that you have not overlooked any contamination. In the normal welding process, it is customary to first make connections in the form of spots and then draw the weld. Between these two operations, you should remove the slag that has formed.
What is the purpose of the electrode?
The electrode is used to supply and remove the electric current during the welding process.
What are inert gases?
These gases are also called shielding gases and are used in some welding processes. They have the advantage that they do not react with the work piece. The most commonly used inert gas is argon.
What are the advantages of shielding gases?
The shielding gas prevents the molten weld metal from reacting with oxygen and nitrogen. It surrounds the electrode and protects it during the welding process.
What is an inverter welder?
This type of welder makes it possible for you to use alternating current or three-phase current and convert it into current with constant, electronically controlled voltage. These devices are not only light and handy, but also promise a high efficiency.
How much does a TIG welder cost?
You will find these welders in a very wide price range. Depending on the function and performance with which the welder is equipped, you can expect to pay several hundred dollars. The price also depends on the accessories that you need in addition to the device.
Before you buy a TIG welder, you should know exactly what requirements you have for the device and what material you intend to process with it. Based on this, you can then pick out the offer that suits your needs and compare prices.
Where to buy TIG welders?
On the one hand, you can purchase TIG welding equipment from specialized dealers or directly from the manufacturer. Here you have the advantage that you receive individual advice from a specialist and can look at the equipment directly on site. Various DIY stores also offer TIG welding equipment and also always have offers in their assortment.
The disadvantage here, however, is clearly the limited selection, which also limits you in terms of prices.
You should inform yourself about the welding equipment in advance and then you can pick out the right model for you. We have presented some of the most common models offered via Amazon in our product comparison and have gone into technical features, special functions, as well as advantages and disadvantages.
Which manufacturers of TIG welders are there?
Among the best-known manufacturers of these welders are, for example, Stahlwerk, Rehm and Carmon. However, it is precisely in the case of TIG welders that numerous manufacturers, whose name is not immediately known, also have high-quality products in stock.
Here, you should rather pay attention to what functions are important to you and what performance the welder should provide. Only when you have listed the exact requirements and know what materials you want to process, you should go in search of suitable welding equipment, regardless of the manufacturer.
Is there a TIG welder test by Stiftung Warentest?
Currently, there is no TIG welding equipment test by Stiftung Warentest. Nevertheless, it can be worthwhile to visit the website once and inform yourself about the topic of welding equipment. Interesting and informative articles appear at Stiftung Warentest time and again.
If Stiftung Waren test deals with the topic of TIG welding equipment and chooses a test winner, we will inform you about it here. It can
Worthwhile to regularly visit the consumer organization’s website to look for test reports for equipment or services.
Is there a TIG welding equipment test from Öko Test?
Unfortunately, we could not find a TIG welding equipment test from Öko Test either. Despite this, you can still find valuable guides and test reports from the consumer magazine and use them to your advantage. We will of course inform you when a TIG welding equipment test is published by Öko Test.
Frequently asked questions
- What types of welders are there?
- How do TIG welders work?
- What are the additional functions of TIG welders?
- What are inert gases?
- What is the advantage of inert gases?
- What is an inverter welder?
- How much does a TIG welder cost?
- Where to buy TIG welders?
- Is there a TIG welder
Welding equipment: test & recommendations (10/20)
Welcome to our big welder test 2021, where we present you all the welders we tested in detail. We have compiled detailed background information and also added a summary of customer-reviews on the web.
With this, we want to make your purchase decision easier and help you find the best welding machine for you.
You will also find answers to frequently-asked-questions in our guide. If available, we also offer you interesting test-videos. Furthermore, you will also find some important information on this page, which you should definitely pay attention to, if you want to buy a welding machine.
The most important in a nutshell
Welding equipment allows you to independently carry out repairs on various materials, realize projects that require the welding of work pieces and remove rust, for example, on the car.
Basically, there are five different welding methods, oxyacetylene, arc, shielded arc, TIG and ultrasonic welding. Depending on the welding method, different types of material and work piece thickness can be processed with the welding machine.
It is important to note which welding power is suitable for beginners and which can only be handled as a professional and that you protect yourself, for example, with a suitable welding helmet.
Welding machine test:
Favorites of the editors
The best welding machine for beginners
The best welding set
The best welding machine with shielding gas
The best lightweight welder
The best oxyacetylene welder
The best welder for beginners
The Ferm “WEM1042” electrode welder, despite its light weight and compact size, offers a powerful torch that is easy to use.
It is especially a good choice for the beginner and amateur welder. Due to its nature, it is best suited for use in the open space, even in the rain
The best welding machine with shielding gas
The Berlan “BWIG180” electrode TIG welder, despite its light weight and compact size, offers a powerful torch that is easy to use.
It combines two welding processes in one unit, saving the need to purchase two different units. In addition, it takes up little space compared to larger industrial units.
Inverter welder test
Construction and repair work is almost impossible to imagine without a welding machine. This indispensable tool allows you to cut and weld different types of metals.
There are several types of welding machines, but inverter welding machines are the most popular. They combine mobility, efficiency and ergonomics.
Inverter welders are powerful, so they are ideal for various types of work. These welders have automatic control and can perform high-quality DC welding. Moreover, inverter welders are the best option for working with ferrous and non-ferrous metals as they have a wide welding current range.
Other advantages of welding inverters include ease of use, mobility, the presence of a stable arc, as well as all kinds of technologies that improve the work with the device, protect the user and contribute to the excellent results.
Best inverter welders test
STAHLWERK ARC 200 MD IGBT Inverter Welder Test
What is an inverter welder? The inverter welder is powerful, lightweight and it is suitable for beginners and professionals.
STAHLWERK ARC 200 MD IGBT inverter welder with 200 amps for MMA and ARC electric hand welding is very popular because it is compact and handy. This device with the MMA / E-hand welding can be used in almost all conditions
Its weight is only 2.5 kg and its dimensions are 29 x 18 x 18 cm. The inverter gas shielded welder can weld low and high alloy steels, nickel-based and copper alloys.
The scope of delivery includes a welder with the carrying strap, a ground cable (2 meters long) and a cable with electrode holder (2 meters).
This device is a bestseller because it offers many extras that make the work convenient and safe.
- Advanced IGBT technology provides high blocking voltage, making the inverter powerful, durable and robust.
- An overheat protection function turns the unit off when it is overloaded.
- Cooling is provided by a powerful fan. This fan promotes maximum power and increases a duty cycle of the welder.
- An ARC Force function allows you to regulate the arc length.
- A Hot Start function warms the start of the weld and increases the voltage at startup for better welding results.
- An Anti Stick function prevents the electrode from sticking.
- It is lightweight and portable.
- It has a good price-performance ratio.
- It offers excellent welding quality.
- The housing is sturdy and reliable.
- The ignition process is very smooth.
- The welding current is very adjustable.
- There are no dropouts and no spatter.
- It can weld various metals.
- The cooling system works perfectly.
- The protection class is IP21.
- The control panel is clear and ergonomic.
- The welding cable is too short.
- The STAHLWERK ARC 200 MD IGBT inverter welder can be very noisy.
GYS 160 P electrode inverter welder test
This inverter welder from GYS is innovative because it offers very high arc dynamics.
This microprocessor controlled inverter offers the welding power from 10 A to 160 A. With this device, amateur DIY welders and advanced welders can weld various metals such as cast iron, steel and stainless steel. Therefore, you can perform various works of different complexity and achieve perfect seams.
The weight of this electrode welder inverter is 4.2 kg and its dimensions are 17 x 27 x 11 cm.
The scope of delivery includes a GYS 160 P manual electric welding inverter, a ground clamp with 1.6 m cable, an electrode holder with 2 m cable, a carrying strap and a hard case.
The inverter welder is packed with different technologies:
- PROTEC400 technology protects against overvoltage, under voltage and mains voltage fluctuations. It increases the working time and service life.
- A Hot Start function improves ignition performance when starting work.
- An Arc Force function stabilizes the arc during operation.
- An anti-stick function eliminates electrode sticking.
- Air cooling protects the unit from overheating and extends operating time.
- It has a compact design, therefore it is mobile and lightweight.
- The handling of the welding machine is very simple.
- The price-performance ratio is good.
- It has a low power consumption.
- The inverter is finely adjustable.
- It is generator compatible (6 Kw generator ±15%).
- It works well with the electrodes with diameter from 1.6 mm to 4 mm.
- It has a stable arc.
- The welding machine has good ignition characteristics.
- There is a potentiometer with easy to read scale.
- The GZS inverter welder is insensitive to current and arc fluctuations.
MIG-250 MIG MAG Inverter Welder Test
This sturdy inverter welding machine from Ipotools combines functionality, excellent quality and a reasonable price. It has MIG / MAG, MMA E-hand welding methods and shows good results in professional and hobby welding.
The power is 250 A and the input voltage is 230 V. Therefore, you can perform the work of different complexity and weld different metals such as aluminum, steel and stainless steel.
The weight of MIG 250 is 15.6 kg and the size is 410 x 310 x 215 mm.
The scope of delivery includes a MIG hose package, an electrode holder of 2.5 m, a ground clamp of 2.5 m, 2 current nozzles and an English instruction manual.
This inverter gas shielded welder has various functions:
- Inverter technology provides good welds and high performance.
- A fan provides good cooling and protects against overheating.
- A hot start function makes it easier to start work and gives extra welding current at the moment the metal contacts the electrode.
- An anti-stick function lowers the welding current and voltage to the “0” mark when the electrode sticks.
- The inverter shielding gas welder is compact and portable.
- A price-performance ratio is top.
- It has a good quality of workmanship.
- There is the step less adjustment of the welding current.
- The wire feed is very good.
- Parameter setting is easy and fast.
- Various functions (hot start and anti-stick) make the welding process convenient and safe.
- There is no German instruction manual.
- The hose package and ground cable are relatively short.
- There is no manual wire feed button.
- The welding gun is not of very good quality.
WELDINGER E 181 eco: Electrode welding inverter test
Weldinger’s ME200eco has perfect functionality, 200 A output, 230 V input voltage. It is light, compact and welds neatly.
This welding machine is easy to operate, so the beginners can use it easily. Meanwhile, the electrode welder inverter is not cheaply processed, so you can do various household tasks.
The welder weighs only 10 kg and its size is 22 x 43 x 37 cm.
Accessories include a welder ME 200eco, a cleanly processed MAG torch, a ground cable (4 m long), an electrode cable (4 m long), a gas hose, a comprehensive instruction manual and a CD.
The features of the inverter welder include
- A Hot Start function boosts the output voltage during welding and facilitates arc ignition.
- An Arc Force function increases the output current when the arc becomes too short.
- An Anti Stick function reduces the welding current when an electrode sticks.
- A built-in fan provides long duty cycle.
– It is light and handy.
– The workmanship is very good.
– This device is fine adjustable.
– There is the low slagging on the weld.
– The instruction manual is helpful.
– The electrode holder is stable.
– The penetration is very uniform.
– The connections are long.
– The power can be adjusted continuously.
– Steel, stainless steel, aluminum du galvanized metal can be welded.
– The hose assembly is stiff.
– The power switch is located at the back. It is uncomfortable.
Welding equipment comparison 2021
On the test and comparison portal of COMPUTER BILD we present you the best welding machines.
Inert-gas welders are suitable for all applications and also for beginners among do-it- yourself . Anyone who frequently carries out welding work cannot do without a good welding device. Simple in
Tests show the differences between the devices: While some are equipped with a 230-volt connection, more powerful welders require 400 volts of voltage. Other important aspects are the switching levels. For optimal work, the welder should have at least 10 switching levels. Read our buying guide to find the best welding machine.
Buyer’s guide to the welding machine test or comparison:
Find your personal welding machine test winner with our help!
– Welding is the most important process for permanently joining metals. The workpieces can meld at the contact surfaces and then join. After cooling down, a stable weld seam can form at the joint.
– For beginners, we recommend a gas-shielded welder. Gas-shielded welding is an ideal process for beginners because it is quite simple and produces good results immediately.
– For beginners, it may be worthwhile to reach for an inexpensive welder that costs around 200dollars. For more ambitious do-it-yourself who weld more frequently, we recommend a device in the 500 euro and up price range.
There are a variety of ways to join work pieces together. These include soldering, which is familiar from the plumbing and electronics sectors, and gluing and gluing, which is familiar from carpentry work. Another option, which is particularly suitable for materials such as sheet metal and stainless steel (for example in the automotive sector), is welding.
In welding, in turn, a distinction can make between different processes. Gas-shielded welding can recommend for do-it-yourself.
If you too would like to take up welding equipment, we will tell you what you need to look out for when buying and using a welding machine. We have studied some welding equipment tests and present you here a selection of suitable welding equipment for your DIY basement.
With a gas shielded welder you connect almost all metals:
The process of gas shielded welding begins with an arc that creates the temperature necessary to melt the material. This arc is created by electrical voltage. This, in turn, is generated between the work piece and the torch of the welder.
The high temperature causes the materials to melt at the contact surfaces where they are then joined. When the material cools, a permanent joint is formed between two pieces. To prevent the weld from deteriorating due to oxidation of the molten metal, shielding gas welders emit a gas that shields the molten material from oxygen in the air.
There are different types of welding processes and correspondingly different types of welding equipment. MIG welding, or metal inert gas welding, uses inert gases.
The inert gases used, argon or helium, are particularly suitable because they hardly react with other substances. MIG welding is optimal when joining non-ferrous metals, such as aluminum.
MAG welding (metal active gas welding), on the other hand, uses reactive gases, such as carbon dioxide in special CO2 welding equipment. The MAG process is used primarily to weld steels.
MIG and MAG welders can be used for both processes. They simply need to be equipped with the appropriate gas.
As the most frequently used equipment in the private as well as in the commercial sector, gas-shielded welding equipment has the following advantages and disadvantages:
- easy to use
- fast working
- can only be used outdoors to a limited extent (shielding gas can be blown away by the wind)
Buying guide: how to find the best welding machine for your next DIY project:
Even if you want to buy a good shielding gas or electric welder, you don’t necessarily have to dig deep into your pockets. Inexpensive welders are especially worthwhile for beginners. Often there are even brand-name welders on offer from discounters such as Aldi and Lidl. You can also find them in their online stores.
Tip: Inverter welding units use a different welding power source. Inverter welding units are available for all common welding processes.
2.1 The mains connection
When buying, first pay attention to the mains connection of the welding unit. Many units require a conventional 230-volt outlet, while others have a 400-volt connection. A few units have connections for both voltages.
2.2 The maximum welding current
The amperage is a central aspect of gas-shielded welding. The higher the amperage, the hotter the arc generated. If you want to weld stainless steel with your welder, you need about 30 amps (amps) per millimeter of material thickness. For unalloyed steels it is 40 amperes.
2.3 The duty cycle
As you probably already guessed, not only the work pieces are strongly heated during welding. The welding machine components also get very hot. For this reason, welding units switch off automatically as soon as a certain period of use has been reached. Otherwise, there is a risk of damage to the device.
The duty cycle provides information on how long a welding device can be used at a stretch. Duty cycle is expressed as a percentage per ampere. At 60% / 40 A, you can weld for 6 minutes at a time if you need 30 amps. After that, you must take a break.
2.4 Through thick and thin: control range and switching steps
The control range of the amperage shows with which amperage the device works. Different materials and work piece thicknesses require different amperage. The larger the control range, the more different work pieces you can weld with it.
The switching steps within the control range allow you to precisely set the required amperage. The more switching steps there are, the more precise the setting options. Standard are 4 switching steps, but there are also welders with 10 switching steps.
2.5 The wire thickness
The welding wire is an important welding accessory. It is burned continuously during gas-shielded welding to join the work pieces together. It is therefore obvious that the welding wire must fit the work pieces perfectly. The wider the gap, the thicker the wire must be. Welding wires for DIY applications are between 0.6 and 1.2 mm thick. The most common are wires with 0.8 mm. Therefore, we recommend that you choose a device that can handle this wire thickness.
2.6 The length of hose package and ground wire
The length of the hose package and ground cable determines the maximum distance you can have from the welder when welding. This information is important, for example, when you are working on the underbody of a car on a lifting platform.
A hose package that is too short can throw a spanner in the works. We recommend a length of at least 2 m, which is achieved by many devices in welding machine tests.
Detachable hose packages are particularly practical. The following overview provides you with information about fixed and detachable hose packages.
Detachable hose package fixed hose package:
- also for entry-level models
- longer hose assemblies can be retrofitted
- defective hose packages can be replaced – the rule with particularly low-priced welding units
- length not variable
- no exchange possible in case of defect
The best welders have a wide control range and many switching levels:
A welder with a wide control range allows you to weld many different materials. Particularly good welders have a control range of 30 – 250 amps. The number of switching levels also indicates how precisely you can adjust the amperage. Devices that have 10 and more switching stages perform particularly well here.
Welding equipment in the test: The longer the cable, the more leeway.
Pay attention to the possible duty cycle of your welding device.
The length of the hose package as well as the ground cable is the limiting factor in the spatial distance from the device that you can maximize. The longer the hose and cable, the farther you can move away from the unit while welding.
Take the length into account when purchasing. Lengths around 4 m are optimal if you need to bridge larger distances.
Tips for working with a welder:
Welding is dangerous and should therefore be carried out with the appropriate caution and care. To ensure that you weld safely, you should observe a few points:
- Wear protective work clothing: closed-toe shoes and clothing that covers the body.
- Protect your hands with tight leather gloves.
- Be sure to protect your eyes. For this purpose, a welding helmet or a hand shield are considerably better than welding goggles.
- Due to the harmful gases produced, you should only weld in well-ventilated environments.
6 Frequently asked questions about welding and welding equipment
6.1 What is a TIG welder?
The acronym TIG stands for tungsten inert gas welding. This refers to a specific form of gas-shielded welding.
Electric and TIG welders use an arc through which the required temperature for the welding process is achieved. In MAG and MIG welding, the weld is protected by a gas mixture that is non-flammable.
TIG welders have a tungsten electrode in the torch head. Since tungsten has a very high melting point, the electrodes remain intact during welding.
During welding, the filler metal, which is shaped like a wire, is held close to the electrode of the welder. The advantage of TIG welding is the much higher quality of the weld.
However, the process of welding takes more time. In addition, TIG welding requires more skill. Therefore, it is not necessarily suitable for beginners.
6.2 What is a flux-cored welder?
Unlike a MAG welder, a flux-cored welder does not use gas cylinders. This is because MAG welding uses a special welding wire. This has a special mixture of substances inside it that releases gas (known as shielding gas) when it burns, which shields the liquid metal from oxygen.
High amperage are required for flux-cored welding. Therefore, this method is not suitable for thin sheets. Since flux cored wires are significantly more expensive than conventional wires due to their special composition, flux cored welding involves higher long-term costs than MAG and MIG welding.
6.3 What is the difference between cutting torches, welding torches and welding equipment?
First of all, about the similarities of the equipment: welding equipment, welding torches and cutting torches need gas for operation.
The difference is the way this gas can use: in shielding gas welders, the gas acts as a barrier, shielding the liquid metal from the surrounding air and, more importantly, the oxygen it contains.
In welding torches or cutting torches, on the other hand, the gas can burn. This produces a flame with a particularly high temperature. This can also cut through thick metals. Unlike welding equipment, cutting torches do not join work pieces together but separate them from one another.
Welding torches or oxyacetylene welders can also join work pieces together. For this purpose, a welding rod is melted, which joins work pieces together in a similar way to solder.
6.4 What are the brands and manufacturers of welding equipment?
Gas-shielded welding equipment is easy to use, but can rarely use outdoors.
There are numerous welding equipment of different categories and designations in the market: MAG welders, MIG welders, inert gas welders or inverter welders.
The main manufacturers of (professional) welding equipment and welding accessories include the following:
- Iskra Mig Mag
6.5 How does Stiftung Warentest rate welding equipment?
Unfortunately, you won’t find any references to a welding machine test at Stiftung Warentest yet. Even the editors of the DIY magazine “Selbst ist der Mann” have not yet chosen a welding machine test winner. So we have no choice but to refer you to our 2020 welding equipment comparison – specifically the comparison winner and the price-performance winner.
Welding equipment test – info, news & recommendation
Looking for a welding machine ? Then you are exactly right on Welder Test ! We give you all the information you need and help you choose.
Our goal : Eliminate all ambiguities.
We want you to know exactly which welder fits your needs and have the best offers right in front of you.
Your first welding machine? The crash course as an introduction starts at the bottom of the page.
O welding equipment test waiting for you….
…Orientation guide and classification of welding equipment
Which welder for what ? After your visit on welding equipment test you will know for sure which welding equipment fits best to which activity. We have classified all welding machines in detail, so that you know right away which welding machine is suitable for your project.
…adviser, tips and further useful references before the purchase
No more “bad” surprise before buying ! On Welder Test you will find helpful tips and hints that will help you to make the right decision. We want you to know about all the important information and no longer have to search for the right content on countless pages.
…Welder Tests and Recommendations 2020
We are always looking for the best ! Use our favorites to make a good choice. You will find detailed test reports with final evaluation. In particular, we have highlighted the special features and points of criticism. There is something for every welder “type”:
– Shielding gas, electrode, flux cored and specific welding equipment in the test.
According to the following criteria was evaluated :
Price and performance. Here we take a closer look at the data and key figures. The scope of delivery also plays a role. The performance and scope of delivery in relation to the price, is then compared with numerous other offers.
Features and extras. In this aspect, the given functions and features play a role. Everything that is positive about the welder is noted here, compared and then evaluated.
Quality and practical experience. The numerous customer opinions play a major role here. We analyze and read through the sometimes vast numbers of reviews. We record the most important and also repeatedly mentioned aspects and points of criticism. In this way, you can get a good impression of exactly what to expect.
All welding equipment has been selected with care and we continue to strive to filter out the best welding equipment for you.
Before you rush off to the recommendations, guides and welding machine tests, we have prepared here again a small crash course by going into more detail on how the individual welding machines work. A little introduction for newcomers.
Crash course : All welding machines briefly explained !
Shielding gas welder:
There are two things added to the weld in the shielding gas welder. One is the steel wire and the other is the shielding gas.
The shielding gas has the task of protecting the arc, including the seam and joint, from the surrounding atmosphere, thus protecting it from oxidation.
The steel wire is fed through a hose package to the welding point by means of a feed device. The shielding gas also emerges through the same hose package during welding.
With the help of the continuously fed steel wire and the simultaneously exiting shielding gas, which usually consists of CO2 and argon, the materials can be neatly brought together without pores and with a beautiful weld seam.
What speaks for and against a shielding gas welder and when it is the right choice, you will learn on shielding gas welder test.
Flux-cored wire welder:
The flux-cored wire welder is often referred to as the little brother of the shielding gas welder. It is smaller and can do without a gas cylinder.
With the flux-cored wire welder, too, the arc is protected from the atmosphere with the aid of a shielding gas. However, the shielding gas is not supplied externally via a gas cylinder, but is contained in the so-called flux cored wire.
This cored wire consists of a sheet metal sheath and a powder core. The shielding gas is then produced from this powder during welding. The shielding gas is generated in the arc.
On cored wire welder test you will learn when such a model makes sense. You will find the advantages and disadvantages, a comparison and much more.
With the electrode welder, neither a gas cylinder nor a welding rod is needed for welding. Here, a rod electrode is used for welding, which consists of a steel core and is coated with some substances.
The coating burns off during welding and spreads over the weld seam to protect it from oxidation and maintain the existing proportion of carbon in the weld metal.
With each welding process, the stick electrode becomes a little shorter and must therefore be replaced after a certain time, as with the welding wire.
When an electrode welder is useful and what advantages and disadvantages it has, you can learn on electrode welder test.
The TIG welder is similar to the shielding gas welder. Instead of the protective wire or the flux cored wire, a tungsten electrode is used here.
In contrast to the welding wire and flux cored wire, this tungsten electrode does not melt during the welding process and does not mix with the weld metal.
So here you can add the filler metal separately and manually. The welding torch is navigated with one hand and the filler metal is added with the other.
What is a lot more cumbersome for beginners, is for the professionals a way to optimize the weld.
Again, you can find more information on TIG welder test. There we explain the good and bad aspects and clarify the question for whom a TIG welder is worthwhile.
An inverter welder does not reflect a welding process in its own right and should not be considered a new welding model in its own right. Rather, it is a separate or different design of the existing welding equipment.
Instead of a transformer, an inverter is used as the welding power source. This is smaller, lighter and offers an electronically controlled welding current. The question remains…
…is an inverter welding machine to be preferred? You can find more information about this on Inverter Welder Test, where we go into more detail about the positive and negative aspects, among other things.
Here my has a device only with welding torch and two gas cylinders. These are usually an oxygen and acetylene cylinder. The acetylene-oxygen gas mixture is used to create a flame. It does not require mains power.
You can find the exact operation on oxyacetylene welder. There we also go into great detail about the components, special features and points of criticism.
Now you can get started! We wish you a lot of fun on welder test and good success in welding.
Ipotools NTF SUPERTIG 200DI TIG welder – storage of ten working settings
- Ipotools NTF SUPERTIG 200DI TIG welder is a fully digital 200 amp welder with a 32-bit microprocessor and high frequency ignition. You can use this unit with RF ignition for the following welding processes:
- AC / DC TIG
- PULSE TIG
- MMA E-Hand
In addition to the pulse function, the TIG welder has the options of direct current and alternating current, which is why it can weld metals such as steel, aluminum, stainless steel, titanium and copper alloys without any problems.
Through the rod electrode, you can achieve almost perfect welding results, which makes the device interesting for both amateur home craftsmen and professionals. The 32-bit processor in the TIG welder allows you to save ten work settings. The device displays these via a digital display.
The Ipotools NTF SUPERTIG 200DI TIG welder ensures sufficient mobility with the 3-meter welding cable, so you are not limited in your work. Also, the low weight of 15.5 kilograms facilitates the way of working and the shoulder strap allows you to carry the device practically and easily. The job memory gives you the option of recalling your user-defined settings at any time.
What does TIG stand for? TIG means tungsten inert gas and refers to an electric welding process in which the shielding gas welder does not consume the electrode due to its high melting point and by feeding the welding wire externally.
Can the unit do two-stroke and four-stroke?
Yes, the Ipotools NTF SUPERTIG 200DI TIG welder can do both.
Can I connect a foot control to the welder?
The control cable connection is five-pole, so you can use a foot pedal as well. The manufacturer offers extra foot controllers for this purpose.
Is the instruction manual of the Ipotools NTF SUPERTIG 200DI TIG welder in German?
No, the manual is in English.
Is it possible to use the machine as a plasma cutter?
You cannot use the TIG welder as a plasma cutter.
Can I set the times only by full seconds? Or also by tenths of seconds?
You can also set the times in tenths of seconds.
STAHLWERK WIG 200ST IGBT – TIG welder with high-performance cooling and overheating protection:
The STAHLWERK TIG 200ST IGBT is a TIG welder with MMA-E-hand function. Together with the professional WP-26 hose package, the unit provides a solid foundation for amateur, as well as advanced welders. The TIG welder is equipped with high-performance cooling and overheating protection to give you long and durable welding. The manufacturer uses Modern IGBT technology here, as well as a power of 200 amps.
STAHLWERK TIG 200ST IGBT TIG welder is suitable for welding non-alloy or low-alloy steels as well as stainless steels, copper and brass. It is suitable for thin sheet metal, but welding of aluminum is not possible. With a weight of 7.2 kilograms, the device is very handy and can be easily transported. The manufacturer gives a five-year warranty and also offers telephone advice, technical support and service outside the warranty period.
The product features at a glance:
- DC direct current for non-alloy and low-alloy steels, stainless steel, copper and brass
- Suitable for thin sheet
- MMA/ARC electrodes
- No aluminum welding possible
- High frequency arc ignition – HF
- Anti-Stick, ARC Force, Hotstart
- IGBT technology
- High performance cooling by two high speed fans
- Overheating protection – O.C. – Overheating Control
- Ergonomic and robust ST-Guard housing
- 5 meter hose package
- 5 meter ground and electrode cable
What is overheating protection on the TIG welder? The overheating protection ensures safety and kicks in as soon as the unit is overloaded.
In this case, a yellow control light is illuminated. The light goes out as soon as the unit has cooled down again. We will go into this topic in more detail in our guide following the product comparison.
What current is possible at 100 percent continuous operation?
This means that you can weld continuously for 10 minutes at 100 percent ED and then have to give the unit a break of 10 minutes. Accordingly, continuous operation is unfortunately not possible.
Does this unit have a gas pre- and post-flow?
Yes, the STAHLWERK TIG 200ST IGBT TIG welder has a gas pre- and after flow.
Can I also weld titanium with the STAHLWERK TIG 200ST IGBT TIG welder?
With this DC unit you can only process steel and stainless steel. You need an AC/DC unit like the AC/DC TIG 200 ST IGBT to be able to process steel, stainless steel, aluminum and also titanium.
Does the machine have two- or four-stroke and can I connect other hose assemblies such as gooseneck?
The TIG welder does not have a switch between two-stroke and four-stroke. Therefore, you can only use it in two-stroke mode. You can also operate other torches on the DIN connections.
Tig Mig TM 200 DIGITAL ALU TIG welder for welding work on all metals and alloys:
With TigMig TM 200 DIGITAL ALU TIG welder you can easily weld all metals and alloys. The red device allows you to weld in TIG AC and DC possible.
The functions in TIG AC are especially ideal for welding aluminum, magnesium and their alloys. In addition, the IPL generator with micro-inverter technology, also known as IGBT for short, ensures a better welding result. This creates arc ynamics and the better performance. The welder is subject to strict ecological conditions.
The small and compact design of the device simplifies transportation, however, at around 21.9 kilograms; it can relatively heavy compare to the other featured devices in our TIG welder comparison.
The housing of the Tig Mig TM 200 DIGITAL ALU TIG welder is made of impact-resistant plastic. It is self-extinguishing and corrosion resistant, which provides better durability. The welder is prepared for RC radio control. You can connect it to a motor generator.
What does welding in DC mean?
In DC, the electrode can be at minus, which causes the electrons to move from the electrode to the work piece. Heating of the work piece occurs, but the electrode remains relatively cool and is more resilient.
You should not use it on aluminum, brass, and magnesium. With DC, if the electrode is at plus, the electrode heats up, but there is hardly any penetration in the work piece and the load capacity is lower.
However, with this cleaning effect, the cations migrate to the work piece and can break the oxide layer on aluminum.
Is the TigMig TM 200 DIGITAL ALU TIG welder capable of two- and four-cycle welding?
Yes, you can weld with the unit in two-cycle and in four-cycle.
What is the diameter of the connector sockets?
There is a WP-26 torch installed in the TigMig TM 200 DIGITAL ALU TIG welder, unfortunately only with 9-millimeter plugs. It looks very small, but serves its purpose.
Does the unit have HF ignition?
Yes, it has HF and LIFT ignition.
Does the welder have a pulse function?
Yes, there is a pulse function
Einhell TC-IW 150 TIG welder – for clean and professional arc welding:
The Einhell TC-IW 150 TIG welder allows you to perform clean and professional arc welding, which is partly due to its high performance.
You can regulate the welding current continuously. Fan cooling ensures that you can work for a long time without interruption and the device does not overheat.
In the event of overheating, the thermal monitor intervenes and warns by means of an indicator light.
The welding current of the coated electrodes ranges from 20 to 130 amps. In TIG welding, the welding current is between 20 and 150 amperes. To prevent the electrodes from sticking during electrode welding, the manufacturer has installed an anti-stick function.
The welder is suitable for use with electrodes with a diameter of 1.6 millimeters to 3.2 millimeters.
You can choose between electrode or TIG welding, as you can use the Einhell TC-IW 150 TIG welder with a separately available TIG torch for gas shielded welding.
The device also has a ground clamp and an electrode holder, which you can in turn connect with a quick coupling. At 4.84 kilograms, the welder is very light and handy, which makes it easy to transport with the accompanying carrying strap. The sheet steel housing provides sufficient protection during transport.
What is AC welding?
AC is a compromise of both DC poles. Both effects are present, i.e. on the one hand the penetration half-wave at the work piece and the cooling half-wave at the electrode when the electrode is at the negative pole.
On the other hand, there is also the cleaning effect due to the positive pole. AC welding is also possible on aluminum, magnesium and brass. In some AC TIG equipment, the ratio of the two effects can adjust.
What is the maximum diameter of the electrode?
The maximum diameter of the electrode is 3.2 millimeters.
What are the dimensions of the Einhell TC-IW 150 TIG welder?
The device has the following dimensions: 27.8 x 11.3 x 19 centimeters.
What components are supplied?
You will receive the Einhell TC-IW 150 TIG welder with a carrying strap, ground clamp and electrode holder.
What is the maximum welding current?
The maximum is 150 amps.
Welding equipment: test & recommendations (10/20)
Welcome to our big welder test 2020, where we present you all the welders we tested in detail. We have compiled detailed background information.
With this, we want to make your purchase decision easier and help you find the best welding machine for you.
You will also find answers to faq in our guide. If available, we also offer-you interesting test videos. Furthermore, you will also find some important information on this page, which you should definitely pay attention to, if you want to buy a welding machine.
The most important in a nutshell:
Welding equipment allows you to independently carry out repairs on various materials, realize projects that require the welding of work pieces and remove rust, for example, on the car.
Basically, there are five different welding processes, oxyacetylene, arc, shielding gas, TIG and ultrasonic welding. Depending on welding process, different types of material and work piece thickness can be processed with the welding machine.
It is important to note which welding power is suitable for beginners and which can only be handled as a professional and that you protect yourself, for example, with a suitable welding helmet.
Welding machine test:
- Favorites of the editors
- The best welding machine for beginners
- The best welding set
- The best welding machine with shielding gas
- The best lightweight welder
- The best oxyacetylene welder
Guide: Questions you should deal with before buying a welder
How much does a welder cost?
Welding equipment comes in all price ranges – whether it’s a cheap unit for home use or an expensive welding power for professional use, where the amount can even go over 10,000€.
An electrode welder can purchase for as little as €50, and an oxyacetylene welding torch is also available for less than €100.
TIG welding power one receives likewise favorably starting from 80 euro. This makes the purchase of a welding power quite inexpensive, even for do-it-yourselfers.
Overall, prices are quite justifiable, because certain standards have to meet depending on the use. Especially if you want to achieve a decent result and buy a long-lasting product, the prices are well worth it. (Photo: Christopher Burns / unsplash.com)
A gas shielded welder can also purchase cheaply for as little as 140 dollars to 200. With a starting price of 170 dollars, the ultrasonic welding device is sometimes the most expensive. Who would like itself to put on however a professional variant of these welding procedures, must invest naturally more.
Type Price range
Electrode welder approx. 50-140 dollars
Oxyacetylene welder approx. 70-100 dollars
TIG welder approx. 80-3,200 dollars
Inert gas welder approx. 140-10,000 dollars
Ultrasonic welder approx. 170-3.000 dollars
Prices vary depending on the thickness of the material to weld. The equipment is also an important pricing factor. For private use, therefore, the electrode welding machines and the oxyacetylene welding machines in particular, but also a TIG welding machine, represent an inexpensive option.
Where can I buy a welding machine?
There are several options available to you if you are thinking about buying a welding machine. You do not necessarily have to go to a specialized store.
You can buy welding equipment in a well-stocked specialty store as well as in many hardware stores and sometimes in supermarkets.
For home use in particular, supermarkets such as Lidl and Aldi have been offering inexpensive welding equipment for some years now, especially in their online range.
For an initial consultation, going to a specialized store in the vicinity is quite reasonable, but bought the welding machine does not have to be on site, but can then be done online.
Because the selection of online equipment is considerably larger, and often cheaper, as the buyer is enabled to directly compare prices.
According to our research, most welding equipment in Germany is currently sold on the Internet via the following stores:
Can I rent a welding machine?
You need a welding machine for a specific project or for home once, but do not want to buy one? You don’t have to, because you can also rent a welding machine.
However, you should keep in mind that renting a welding machine is usually only possible in larger cities. This option is mainly suitable for professionals, and thus mainly for industrial use such as for construction sites or assembly.
For DIY use, this option is insofar only worthwhile if you need to perform a specific welding, for which an expensive device would be necessary. There, however, the prices should be weighed as well as the travel distance and the time required.
What types of welding equipment are there and which is the right one for you?
Basically, there are five different types of welding processes and the equipment required for them:
- Oxyacetylene welder
- Arc welder
- MSG welder
- TIG welder
- Ultrasonic welder
These types all have a different mode of operation, and therefore each has its own advantages and disadvantages.
Depending on what material you want to process and what criteria are important to you, a different type of welder is best suited for you.
In the following section, we would like to help you choose the best welding machine for your needs. However, you should always protect yourself during any kind of procedure, among other things with a suitable welding helmet.
For this purpose, we will introduce you to all the above-mentioned types of welding machines and show you in an overview what the respective advantages and disadvantages are.
How does an oxyacetylene welder work and what are its advantages and disadvantages?
This welding machine is also known as acetyl welding or gas fusion welding. The particular advantage of oxyacetylene welding compared to other welding machines is that this welding process does not require feeding of electricity is needed and therefore you can use it not only indoors, but also outdoors.
The process is an oxyacetylene technique called gas welding and belongs to the group of fusion welding processes. With the help of a fuel gas and the supply of oxygen, a welding flame is created.
The work pieces are heated with a flame of oxygen and ethane and welded with a wire, which has a special alloy, or directly with each other.
- Without electric current
- Without cooling water
- Many processes can be implemented with only one burner and one fuel gas cylinder
- Without expensive equipment
- Pollutants (gases, dust/fumes, vapors)
- Special protective clothing
- Optical radiation
- Handling errors
Most techniques can be performed without expensive equipment for the unit. In addition, almost all techniques can only be implemented with the help of a burner and a fuel gas cylinder.
The flame cone is sharply defined, so that the adjustment of the flame is easy and well regulated. Due to the good gap bridging properties, very little or hardly any seam preparation is required.
Almost any material can be processed with an acetyl welder: metallic materials, ferrous materials, sheet metal surfaces, natural stone surfaces and even concrete.
Executable techniques are:
Such a device, which can be used to process anything, is therefore suitable not only for industrial use, but also for DIY households, such as for the prevention of wear on ironwork parts or for the removal of rust and scale layers.
How does an arc welder work and what are its advantages and disadvantages?
This way of welding is also called electric arc welding. This technique of welding is easy to learn and offers the possibility of implementing the project even outside, as you can use such a welder even in the rain.
The special advantage over oxyacetylene welding is that the use of shielding gas can not cause damage to health.
In this process, metal rods serve simultaneously as an arc carrier and also as a so-called welding filler. The electric arc is generated by electricity and thus heats the work pieces. With this method, it is possible to weld a wide variety of metal elements.
- No health hazards with shielding gas
- Assembly work outdoors
- Can be used even in the rain
- Easy to learn
- Private use
- Formation of gases with dangerous heavy metals (without protective gas)
- Temperature difficult to regulate
- Only applicable on certain materials
- Slag formation
- Welding spatter and welding fumes
Especially on the type of stick electrode:
This metal from the electrode then fits between the individual work pieces as an “adhesive”. A typical feature of arc welding is that it also produces a “weld bead” that sometimes resembles the “cream decoration” on a cake.
A welding machine using the arc welding process can be used for steel, iron, copper and many other metals. The use is mainly in the industrial sector
An arc or electrode welder is perfect for getting started in the world of welding. Especially because this type of welding process covers almost all areas of application.
How does an MSG welder work and what are its advantages and disadvantages?
The acronym MSG stands for shielded metal arc welding, which is subdivided according to the type of shielding gas. As with the oxyacetylene welding process, special protective work clothing is recommended when using this welding power. With this one is to be considered additionally a special care with the cleaning.
This is an inert gas welding process that uses either metal inert gas (MIG) or metal active gas (MAG) welding. The difference between MAG welding and MIG welding is that a MIG welder uses inert shielding gases and primarily pulsed arc technology.
- No health hazards
- No formation of harmful substances
- Welding of different metal thicknesses is possible
- Cleaner than other processes
- No slag formation
- Burns with insufficient body coverage
- Blinding of the eyes
- Burns and severe sunburns due to UV radiation
- Expensive purchase and operating costs
An arc burns between the work piece and the wire electrode, during welding the coiled electrode melts and is automatically fed by a wire feeder.
The electrode can surround a nozzle from which the shielding gas exits, protecting the arc and the molten pool from atmospheric influences.
MAG welding technology can use for low-alloy and high-alloy steel. MIG welding, on the other hand, can use to weld aluminum, aluminum alloys, copper, titanium and other non-ferrous metals. The use of these welding machines wil recommend mainly in clean and closed spaces.
How does a TIG welder work and what are its advantages and disadvantages?
Tungsten inert gas welding, or TIG for short, can discover in the USA under the name Argon arc welding and is a classic among welding machines. It is suitable for beginners due to its good handling and is one of the best welding processes available.
A certain heat of the welding zone is generated by an arc in the argon shielding gas and a non-melting tungsten electrode and the work piece.
This method is one of the best welding methods. During welding, an arc burns between the tungsten electrode and the work piece, which is surrounded by an inert gas (helium and argon) that protects the electrode from the air. Due to their properties, these gases do not form chemical compounds.
- Low health impact
- Hardly any welding spatter
- Universally applicable
- Narrow welding zone
- Minimal scaling on the work piece
- Very loud
- Sometimes high heat
- Deformations due to too high heat
- High initial and operating costs
- Practice necessary
There are also two types of arc that can affect the possible materials to be processed. If a direct current arc is chosen, all metals except aluminum can be welded with it. If an arc with alternating current is chosen, almost any material suitable for fusion welding can be joined.
This results in application areas such as boiler, power plant and pipeline construction. But TIG welding is also used in the field of aircraft and spacecraft construction.
Other areas of application include micro joining technology, pharmaceuticals, biotechnology and food technology, but also in tank and apparatus construction and likewise for tool and machine molds.
How does an ultrasonic welder work and what are its advantages and disadvantages?
Ultrasonic welding is a form of friction welding that is mainly used to join thermoplastic materials (thermoplastics). A special feature of this welding process is the absence of electrodes and gas. Instead, it relies on the vibration mechanism.
One of the parts to be joined is clamped firmly in place, while the other part is vibrated by an ultrasonic resonator and simultaneously pressed onto the stationary part. At the point of contact, the molecules of the materials are set in vibration, resulting in a material-to-material bond between the materials.
- No health hazards
- Compact size
- Multifunctional use
- Selective energy supply
- Environmentally friendly technology
- Many accessories required
When welding metals, ultrasonic welding can use, for example, in the production of microelectronics chips.
For environmental friends:
This welding process is especially excellent for use on PP, PVC, PE, PET, ABS, composites, fabrics, nonwovens or films, and with the right accessories, it can also use to process metal.
Buying criteria: Based on these factors, you can compare and evaluate devices for welding.
In the following, we would like to show you which factors you can use to compare and evaluate welding machines. This will make it easier for you to decide whether a particular device is suitable for you or not.
In summary, these are:
- The method of welding
- The place where the welding work is carried out
- Material of the project
- Duty cycle, open circuit voltage and amperes
- Required and enriching features and functions
Tips for TIG welding:
In the following paragraphs you can read the necessary information about each of the purchase criteria, as well as their classification.
The method of welding:
The type of welding process, i.e. with the help of electrode, shielding gas, ultrasonic, tungsten inert gas, or the oxyacetylene welding, we have already gone into detail above.
Nevertheless, we would like to point out once again that the type of mechanism of a welding machine is probably the most important criterion when buying a welding power, because it significantly affects not only the final result, but also the degree of difficulty of operation.
Professional welders naturally ask themselves different questions than beginners, who should make sure when selecting a suitable welding machine that it is suitable for handling by beginners. After all, you don’t want to make things harder for yourself than they are.
A beginner should therefore ask himself whether he can prepare to take a welding test in order to be able to operate all welding machines, or whether a limited selection is sufficient for the intended welding project.
As a beginner, the focus should be on ease of operation and learnability. For this purpose, a gas-shielded welding machine is ideally suited. Many mistakes can avoid because, for example, welding thinner sheets do not require as much precision and experience as an electrode welder.
In addition, it finds versatile applications and covers a large part of the areas of activity in welding. Thus, nothing stands in the way of practicing in a wide variety of welding areas.
A shielding gas torch is also very suitable for occasional welders. However, an experienced welder, especially someone who regularly completes welding projects, will find purchasing criteria such as the location, type of material, as well as technical data more important than ease of use of the device.
Place of performing welding work:
Will you be welding outdoors, in an enclosed space, or alternating between indoors and outdoors? Not every welding machine is suitable for outdoor use, you should always keep that in mind. You should also consider whether the work will do in confined or poorly ventilated spaces.
A TIG welder is not suitable for outdoor use, as no wind is a prerequisite for its use, but it is possible to work with such a torch in confined and poorly ventilated spaces.
Unlike an oxyacetylene torch, TIG welding does not produce exhaust gases or fumes that are harmful to health. For outdoor work, an electrode welding machine should purchase, because this can use even in the rain.
At the same time, one should still be clear that who wants to do welding work outside, it must be clear that either a source of electricity should be nearby, or choose a welding power that does not require electricity for use, such as the oxyacetylene welder.
Material of the project:
Before you choose a welder, you should think about what materials and what thickness of material you want to weld. This is because not every welder is suitable for welding metal or aluminum, for example.
There can guidelines for the power need and the diameter that an electrode must have in order to work on certain materials. We remind you again that the stick electrode must match the material to weld.
Here we have a little guide for you:
- 6 mm to 2 mm electrode thickness.
These dimensions are suitable for thinner materials and offer optimal chances of success with smaller and finer sheets.
2.4 mm electrode diameter
A 2.4 mm electrode is suitable for thicker sheets. With this you can weld material thicknesses up to around 9 mm. With a thicker 2.4 mm electrode you also have some other advantages. When used, you have a more stable arc, which also burns more quietly. In addition, you can grind them better.
Duty cycle, open circuit voltage and amps:
A good welder will have at least a power range of up to 80 amps and an open circuit voltage of 48 volts or more. With this, you can make smaller repairs. Values below this should view with skepticism.
The duty cycle should above 30% at normal power demand. At maximum power consumption, the value may be lower.
Protective clothing should not forget when using a welder. No matter for how long and where you weld, be sure to wear the appropriate protection
The duty cycle percentage indicates how long you can weld within a 10-minute interval. In this case, 30% would mean that you can weld for 3 minutes and then take a 7-minute break.
Inverter or transformer?
First, let’s explain what the difference between these two types is. The inverter welder is very similar to a switch mode power supply. First, the mains voltage can rectify. Then it can chop with power semiconductors and bring to a lower voltage with the help of a small transformer.
The special features of an inverter welding power are, on the one hand, that due to the higher operating frequency, it is much easier to control the most varied and ever-changing welding processes. On the other hand, it is more efficient in energy conversion.
It is also possible to switch between direct and alternating current. In addition, an inverter torch has a good duty cycle. This means that you can usually complete longer welding jobs without a break or with fewer breaks.
Another positive feature is the relatively short cooling phase, which can make possible by the low mass. The following applies: The lower the mass, the faster a welder cools down.
An inverter welder is lighter and therefore more compact and easy to transport than conventional welding forces. However, these are not the only positive features that such a design has.
Depending on the model has different additional functions:
Here we present only the best-known extra functions to give you a brief overview, of course, each with a brief explanation:
This function prevents the sticking and annealing of the electrode by delivering a maximum current shortly before the short circuit.
This briefly exceeds the set welding current at the start to prevent the sticking of the rod electrode and to heat up the initial weld more quickly.
This is an electronic control of the arc. The current value can automatically increase as soon as the arc becomes a little shorter. In this way, the arc length remains almost always constant.
A “modern” variant of contact ignition and similar to brush ignition. Here the electrode can place on the workpiece. Only a small current then flows, which means that the electrode cannot damage.
If the electrode can lift off, the arc ignites and the current increases to the welding current set at the beginning. The advantage with Lift Arc ignition is that you can avoid electromagnetic interference.
An inverter has few disadvantages:
One of the disadvantages includes the susceptibility to interference with electronics, which is low with a transformer. Another is the initial cost, which is higher for an inverter torch than a conventional welder. This also includes potential repair costs.
Required and Enriching Features and Functions:
Once you have decided on a welder based on the criteria explained above, you should think about which features you can do without and which functions you insist on.
With the following list we want to help you with your decision:
With this you can adjust the welding current without much effort. A stepless adjustability would be best here.
Long ground cable and sufficiently long electrode or torch cable.
Clarify in advance whether the supplied cable length is okay for you or you would have to replace it. Cable lengths vary from less than 2 m to more than 2 m. If the cable length is too short, you may have to move the welder.
S-mark or special protection class:
If there is an S-mark, you have the safety and the certainty that you can allow to weld in confined welding areas.
For a better ignition behavior, an electronic control is of great advantage, because it supports a faster ignition of the arc.
A long hose package with standard glands:
The hose assembly should not be too thin. Standard nozzles save the search for the right nozzle.
Fan cooling and thermal protection with indicator light:
These two extras ensure that your welder remains cool and ready for work even during longer welding sessions. With the help of an integrated fan cooling, the heat generated during welding can dissipate efficiently and quickly. If the welder should ever reach its pain threshold, this should be recognizable to the indicator light.
In addition, the thermal monitor ensures that the welding machine automatically switches off at a certain temperature. In addition to this list, we recommend that you invest in further safety measures, such as a suitable welding helmet.
Tips for TIG welding:
If you want to do TIG welding, there are some important features that the welder should have. This will guarantee an optimal work result.
Integrated HF ignition:
With HF ignition, the arc will ignite means of a high-frequency unit already above the workpiece. Integrated HF ignition thus prevents wear on the electrode.
Adjustable gas after flow time, as well as current sink and rise time.
These features can very well suit for thinner sheets and tubes. This prevents the sheet metal from burning away at the seam at the start of the weld and at the end of the weld.
Two-stroke and four-stroke welding:
If you want to weld very long seams as evenly as possible, you should focus on welding machines that can switch between two-stroke and four-stroke.
Trivia: Interesting facts about welding
The history of welding power
Modern welding techniques work with electricity and have been on the market since about the 2nd half of the 20th century. But the knowledge and technology of welding is already thousands of years old. Because to connect materials, electricity is not essential, as already the autogenous welding machine has proven to us.
As early as the 6th millennium BC, the ancient Sumerians in the Orient knew how to weld their gold. Archaeological findings also lead to the assumption that the first techniques of brazing were used in Egypt and Mesopotamia (today’s Syria & Iraq) in 2700 BC.
Indeed, the Egyptians not only built pyramids but also created extensive systems of pipes made of copper, which can connect to each other.
In order to be able to join them together, they developed the fire welding technique. A testimony of the Indians of welded cast iron, is the 16-meter-high obelisk “Iron Column” in Delhi, which can still admire today.
An important observation here is that before the 19th century, fire welding was predominant. The Parisian French uses the welding technique to repair armor, weapons, and horse harnesses. It was not until the invention of the Voltaic column that welding processes can further develop. Thus, at the beginning of the 19th century, studies of electric arcs began.
The technique of arc welding, however, can not develop until almost 100 years later by Slavyanov. It was not until the middle of the 20th century that the next scientific development concerning welding equipment took place when MIG welding can discover in the USA.
Smaller workshops in particular benefited from this evolution, as the equipment became not only smaller but also lighter and cheaper. By making it possible for craftsmen and industry to work together, accelerating the reconstruction of many war-damaged cities. Today, welding machines are also popular with hobby home craftsmen for private use.
Einhell BT-IW 100 Inverter Welder Test:
If you want to buy a cheap inverter welder for small welding jobs, this device with advanced technology is exactly what you need.
With this Einhell BT-IW 100 inverter welder, you can achieve a good result without much experience.
The housing can make of durable sheet steel and reliably protects the welding technology.
The welder has a separate TIG torch, so it can use for gas-shielded welding. It weighs only 5 kilograms and its size is 27 x 18 x 22, so this device is very compact and handy. In addition, it has a carrying strap, therefore it is suitable for mobile use.
The included accessories include an electrode holder and a ground clamp. They can connect to the welder for a quick coupling.
The Einhell BT-IW 100 is equipped with important extras:
- Modern inverter technology ensures low weight and compact design. It makes it possible to weld thin materials. In addition, a stable arc is available thanks to the inverter technology.
- An integrated cooling function prevents overheating and ensures longer welding.
- Overheating protection automatically shuts down the device when overheated.
- It is easily transportable and user-friendly.
- The operation is very simple.
- The device offers a good price-performance ratio.
- It has a long service life.
- The welding current can continuously adjust from 10-80 amps.
- The welding cables are flexible and robust.
- The ignition works very well.
- With an integrated cooling function, you can easily weld for a long time.
- It is suitable for stainless steel welding.
- There is no separate on and off-switch.
- The range of use can very limit because the output power is a maximum of 80 A.
- The cables from the ground clamp as well as the electrode holder are too short.
Tube MIG-250MI inverter welder:
If you are looking for a stable, solid, and powerful inverter welder, the Röhr MIG-250MI inverter welder is a good option.
With this device, beginners and professionals can perform various repair works. The place of repair does not matter, as the inverter is lightweight and portable, and it can use in various conditions. In addition, this 200 amp welding machine has a carrying handle. However, some buyers say that it is not of very good quality.
With this welding machine, you can weld various metals from 1 mm to 4.5 mm. These include steel, stainless steel, and aluminum, copper.
The dimensions are 27 cm x 21 cm x 12 cm and its weight is 3.5 kg.
The package includes an electrode cable (2 meters), ground cable (2 meters), power cable (2 meters), and a detailed instruction manual.
Features of this device are as follows:
- IGBT technology provides stable work, a high duty cycle, and good welding results.
- An anti-stick function prevents the electrode from sticking because it provides easy ignition of the electrode.
- The overheating protection can realize with a powerful fan.
- It is small in size but very powerful.
- It is easy to operate.
- The price-performance ratio is good.
- It has a high-duty cycle.
- It provides a stable arc.
- The instruction manual is very detail.
- The welding current is variable.
- The output power can vary between 60 and 200 A.
- With the help of the rotary knob, you can easily and accurately set the amperage.
- It is suitable for electrodes from 1 mm to 4.5 mm.
- You can remove and reverse the polarity of the current leads. Therefore, minus and plus weldable electrodes can use.
- The cables could be longer.
- Some users say that thin materials are difficult to weld.
- The device has a more vulnerable housing processing.
Berlan TIG/TIG 180A Inverter Welder Test:
If you are looking for a welder with easy operation and good value for money, this welding machine will suit you. The Berlin TIG/TIG 180A has a very positive review.
The Berlan TIG/TIG 180A inverter welder is portable and mobile, but powerful. Its power (up to a maximum of 180 A) is good for home use and for more complex jobs. Therefore, it is suitable for amateurs and professionals.
The welder offers excellent safety because the housing can make of sturdy metal. In addition, it has rounded edges and corners.
The inverter shielding gas welder is portable, its weight is 10.5 kg and its dimensions are 371 x 155 x 295 mm.
The inverter offers several things in the accessories: a hose package, a welding shield, and a slag brush.
The inverter shielded arc welder has several features that make it effective:
- An HF ignition function makes it easier to start the arc.
- An overheating protection function can implement by the ventilation slots and a large fan.
- A gas run-on function contributes to overall safety.
- The inverter is small and lightweight.
- The welding machine can very well make.
- The hose assembly and ground cable are sturdy.
- The welder has good safety and long service life.
- The device runs quietly and reliably.
- Thin sheet metal can weld well.
- The welding current can continuously adjust between 20 and 180 A.
- There is no digital amperage display.
- The supplied welding shield is not of good quality.
- The instructions are not very informative.
- The ground cable could be longer.
- The hose is prone to dirt because it will cover in cloth.
GYS 4000 Electrode Inverter Welder Test:
The GYS 4000 Electrode Inverter Welder with perfect handling is good for beginners and professionals because it is suitable for easy utilization and more intensive applications. With this inverter, you can do repair and maintenance work and weld retile, stainless steel, cast iron.
The GYS 4000 has an output voltage between 10 and 160 amps and it has an open circuit voltage of 72 volts. The dimensions without packaging are 27 x 17 x 11 cm and the weight is 4.2 kg.
The scope of delivery is extensive and it has various components:
- A carrying strap.
- A ground clamp with 1.6 m cable with plug TEXAS 10/25 Ø16 mm².
- An electrode holder with 2 m cable with TEXAS 10/25 Ø16 mm² plug.
- A welding helmet LCD Master 11. This welding helmet deserves special attention because based on user feedback it can an absolute heat. It blacks out immediately, it can adjust precisely; the side screws can properly adjust.
The special features are as follows:
- PROTEC400 technology protects against overvoltage, under voltage and mains voltage fluctuations (+/-15%). Therefore, it ensures constant welding performance.
- A Hot Start function improves ignition.
- An Anti Stick function improves penetration and prevents electrode sticking.
- An Arc Force function maintains arc stability.
- The GYS 4000 can cool with a fan.
- It has a good price/performance ratio.
- The build quality is good.
- It is generator capable 6 kW (7.5 kVA).
- This welder is suitable for material thickness from 1.5 to 10 mm.
- It is handy and it is perfect for mobile use.
- A welding helmet LCD Master 11 meets the expectations.
- The welding machine can equip with TIG contact ignition.
- There is a potentiometer for welding current strength.
- There is no minus or plus sign on the outside of the housing.
- The cables supplied are relatively short.
- The maximum power is only 160 A, so the application range can limit.
ESAB Arc 180 electrode inverter welder tests:
- If you want to buy an electrode welder inverter, this mobile inverter welder with the power from 5 to 180 A is an option. This powerful device is easy to use, so both beginners and professionals can use it.
- Its weight is 6.7 kg and dimensions are 310 mm x 140 mm x 230 mm.
- The ESAB Arc 180 comes with 3 m long welding and grounding cables, a power cord, the solid extension cables and a carrying strap.
The welding inverter test shows that this welder can equip with the following features:
- IGBT technology makes the welder very powerful.
- An anti-stick function allows the electrode to break away from the work piece when it sticks.
- A Hot Start function helps ignite bad electrodes, weld rusty metal and low voltage in the network.
- With an Arc Force function, the arc cannot go out.
- A large fan protects against overheating.
- The welder is powerful, handy and lightweight.
- The cables are long enough for comfortable work.
- The inverter welder is suitable for generators.
- The arc is very stable.
- The accessories include the extension cables.
- According to the inverter welder test, anti-stick, arc force and hot start functions make the work comfortable.
– There is no HF ignition.
– Some users say that the ignition is poor.
– The fan works a bit noisy.
TIG 200 Inverter Welder Test:
With this handy and lightweight S-TIG 200 IGBT inverter welder from Stamos Germany, professionals or novices in welding can perform various welding tasks.
The welding machine offers adjustable welding current from 20 to 200 A and the voltage of 230 V.
The weight of this welder is 6 kg and its dimensions is 41 x 14 x 29 cm.
The scope of delivery is extensive and it has a TIG torch (4 m), a welding cable with electrode holder (3 m), a ground cable with clamp (3 m), 2 clamping sleeves (2.4 mm, 3.2 mm), 2 clamping sleeves (2.4 mm, 3.2 mm), a torch cap, a clamping sleeve housing and an instruction manual.
The welder has all the necessary functions:
- Air cooling can realize the fans.
- An HF ignition function facilitates the ignition of the arc.
- A Hot Start function preheats the electrode.
- An Arc Force function means that the strength of the welding current increases when the arc weakens or goes out.
- An Anti Stick function prevents the electrode from sticking.
– The unit is compact and portable.
– The inverter is powerful.
– The quality is good.
– It is user friendly.
– It has TIG and E-hand (MMA) welding processes.
– Stamos S-TIG 200 is very functional due to many useful features.
– The protection class is IP21S.
– There is a 2T/4T switch.
– The accessories are extensive.
- Search for:
- Most Popular
- Best welder for car frames
- Top 10 Best Welding Machine Practical Review: Portable Welder
- Inverter welding machine advantages
- What are the different types of welding machines
- Basic Parameters of the Welding Machine
- Which is the best welding inverters
- Inverter Welding Information
- How can you tell a good welder?
- How to learn how to cook with an inverter:
- How to choose the best welding machine for your application
I’m Sahadat Hossain. I am working as Assistant Professor at Joynagor Technical and BM College. Besides, I have one welding workshop business from 2013. And in 2018 I started blogging about welding accessories. I want to share my experience with using welding accessories. In this blog, all content is written by me.