Tel: +44 (0) 121 783 4071

 

	BSA Machine Tools Ltd  have been awarded a major contract in Pakistan for the supply of CNC Lathes, with the first being the Churchill 6 Series fitted with a Siemens 840 D Control, which will be shipped in June 2011.
	BSA Machine Tools Ltd, have just completed the third contract for  Grant Prideco in Mexico, for 2 further Churchill 7-50B CNC Lathes, equipped with Fanuc 18iT controls.  The machines again are destined for the Veracruz plant in Mexico, and should be operational in Marrch 2011.
	BSA Machine Tools Ltd, announce a repeat order from Grant Prideco in Mexico, for 2 off Churchill 7-50B CNC Lathes, equipped with Fanuc 18iT controls.  The machines are destined for the Veracruz plant in Mexico, and will be delivered in November 2009. This second contract worth over £1,000,000 shows Grant Pridco's confidence in today's difficult economic conditions.
	Centre Lathes, Drills and Milling machines have been ordered by Birmingham Metropolitan College, for the newly refurbished James Watt College, for delivery in August 2010.
	Kirkdale Industrial Training, in Brighouse, awarded BSA Machine Tools the contract to supply 15 Centre Lathes for their new "Training Centre, which opened in July 2010.
	Kingdream in China have placed an order for a three Churchill Viper VT30 CNC Lathes, fitted with a Fanuc 21iT Control for delivery in mid 2010.
	ATB Morley have placed an order for a Large Heavy Duty Lathe, offering 1,250mm swing and 3,000mm between centres.
	Timet based in the West Midlands, have chosen BSA Machine Tools to supply them with 2 off Mostana 1H 65 x 5,000 Heavy Duty Lathes, scheduled for delivery May 2009.
	Engineering Services will be shortly taking delivery of a Mostana RT817 x 10,000 Heavy Duty Lathe for their plant in Wales.
	Skelton Thomas confirmed the order for a CYPML660 x 4,000 Centre Lathe after success with previous C6256 models delivered last year.

	Mr Keith Bailey - Chairman & Chief Executive of BSA Machine Tools accepting a long membership award from the MTA Director General Graham Dewhurst.
	Premier Deep Hole Drilling have placed an order for a Churchill Viper VT 40 x 4,000 CNC Lathe, powered by a Fanuc 21iT, and equipped with VDI Turret, Auto Tailstock and large capacity auto steady.  The machine will be delivered in February 2009.
	Kingdream in China have placed a repeat order for a second Churchill Four Series CNC Lathe, fitted with a Fanuc 18iT Control for delivery in mid 2009.
	Bradford College in Yorkshire have chosen BSA Machine Tools to supply new equipment for their NEW Training School.  16 BSA Centre Lathes, 2 BSA Universal Mills, Pedestal Drills, and Grinding equipment were installed in August 2008.
	Shannxi Deisel in China have ordered an OMEGA 80 equipped with PRO-ELIP, for the production of Large 420mm Pistons.  PRO-ELIP produces the piston complete with the "Out of Round" and Eccentric turning in a single pass.  The machines was shipped in October 2008
	FTL in Leeds, have placed have placed another order for a Re-Engineered BSA 1" x 6 Multi Spindle Automatic, the machine complements the Autoflex 11 and Autoflex 35 Multi Spindle purchased in 2007.
	Grant Prideco in the United States, take delivery of  2 Off Churchill 750 Heavy Duty CNC Lathes.  The machines were installed in their Mexico plant in January / February 2008.
	Dudley College located in the West Midlands have placed orders for 18 machines to restock their Training Centre.  The machines are 16 BSA Centre lathes and 2 Mill Drill machines.  The machines were installed in October 2007.
	De-Smet Rosedowns Ltd in Hull, have placed a repeat order for a second Churchill Viper VT 40 x 2,000.  Fitted with a 500mm closed centre chuck to allow for large billets, some requiring "Hard Metal" turning.  Delivery was completed in April 2008..
	TBT UK Limited have placed an order fro a Churchill Viper VT 40.  With a bed length of 4,000mm and a turning capacity up to 1,000mm.  Controlled by the Fanuc 21iT, the machine will be delivered in June 2008.
	PRD Fasteners in Willenhall have taken delivery of a Churchill FL 30120 Teach lathe fitted with a Fanuc 21iT Control, and a secondary chuck fitted the rear of the spindle.  Through bore of 155mm with a bed length of 3metres.
	Hull College who are setting up a new engineering block placed orders for a number of conventional Centre Lathes, Vertical Turret Mills, Universal Mills and saws.  Fitted with Newall DRO's and fully guarded to "Education Standards".  BSA project managed the project to completion.
	BSA Machine Tools Ltd, announce an order from Grant Prideco in the Uinited States, for 2 off Churchill 7-50 CNC Lathes, equipped with Fanuc 18iT controls.  The machines are destined for the Prideco plant in Mexico, and will be delivered in January 2008.
	Cornwall College in Truro have taken delivery of equipment to equip the training college in Cambourne.  The contract included centre lathes and cutting equipment.
	Rubbernek Fittings in the West Midlands have now taken delivery of 3 off Churchill Viper CNC lathes. Fitted with Magazine Bar Loaders, the machines were 2-Viper VT 17's and a Viper VT 20.  All the machines are controlled by Fanuc OiT controls.
	BSA have just completed an order for China, valued at some £1.5 million for the supply of a Churchill Four Series x 1,500 and 6 off Churchill Viper VT 50 CNC Lathes.  The machines are currently being commissioned in China, by BSA engineers.
	Corus in Scunthorpe, the NEW Mostana R317 RF3 x 6,000 Heavy Duty CNC Lathe has completed its acceptance trials, and passed to CORUS to commence production.  The machine is fitted with a Fanuc OiTC with Manual Guide, and can turn up to 1,200mm diameter and 6,000mm between centres.
	FTL in Leeds, are pleased with their latest acquisition a Re-Engineered BSA Autoflex 11 Multi Spindle Automatic, the machines complements the Autoflex 35 Multi Spindle purchased in 2006.
	Following an extensive advertising campaign a number of orders have been placed for the Churchill Viper VT 17 CNC Lathe,  Kemlows in Hoddesdon were the first to come on board.  Fanuc O Control, 10 Station Turret, Tailstock, Chip Conveyor, and Tool Setter for UNDER £30,000.